About this episode
Foundations of Amateur Radio
Recently I was given some radio data captured on the 40m band. Using a piece of software called "Universal Radio Hacker", I attempted to decode it. At the time I thought that this might be Morse code, since then I've been told by someone who has been using Morse longer than I've been alive, that it isn't.
I shared the data on my VK6FLAB GitHub repository where you can download it and see what you learn, and perhaps repeat what I did, or better still, improve on it.
Over the years I've talked a little about how Software Defined Radio or SDR works, essentially it's a glorified Analogue to Digital converter, much like the sound card in your computer, which does the same, albeit at a much lower frequency. As it happens, you can represent the signal that comes into your radio antenna as a series of values. Essentially, the stronger the signal, the bigger the number, the weaker the signal, the lower the number.
Let's talk about the characteristics of this signal. It consists of two parallel signals, in opposition to each other. The first signal jumps intermittently between 7 kHz and 40 kHz, where the second jumps between -7 kHz and -40 kHz. The recording is marked 7.06 MHz, so if we think of that as the central frequency, the whole signal sits between 7.02 and 7.1 MHz. This 80 kHz wide signal is not something you'd typically be able to hear using a standard amateur radio receiver which tops out at about 3 kHz bandwidth. It's so wide that you couldn't even hear more than one of the four tones at the same time.
Randall VK6WR, who supplied the recording, spotted it on a waterfall display showing a chunk of radio spectrum, in fact, a $25 RTL-SDR dongle could receive this signal.
Aside from the fact that this is a really wide signal, well at least in traditional amateur radio terms, it was interesting in that it was heard on the 40m band. As it happens, just after I shared my initial exploration, I was told by several other amateurs that they had heard the signal. I even saw it on a WebSDR in India and attempted to record it, but failed.
As it happens, a few weeks ago, I was playing with something called "CAN Bus", or Controller Area Network, a technology that was designed in 1983 and is used all over cars for things like sensors for speed, engine temperature, oxygen level, detonation timing and anything else that's happening inside a car. You might know the end-user view of this called OBD2 or On Board Diagnostics, second generation. I was looking into it because my car has been acting up and I've been trying to track down the root cause.
Anyway, I learned that CAN Bus is implemented using something neat, "differential signalling", where two wires each carry the same, but opposite signal, so they can be combined to ensure that in an electrically noisy environment like a car, the information still gets where it needs to go.
Seeing the radio signal Randall shared, reminded me of this.
Noise
